Search results for 'Phantom power'

-Number 35 of 40
-Nightshade finish
-One-piece mahogany set-neck
-Pattern Regular neck carve
-Madagascar rosewood fingerboard
-Dragon tail fingerboard inlay
-24 frets
-Madagascar headstock veneer
-Green Ripple Private Stock eagle headstock inlay
-Phase III Locking tuners
-Madagascar tuner buttons
-Solid african ribbon mahogany body
-Private Stock grade curly maple top w/ retro carve
-85/15 Treble & Bass humbuckers
-Volume, Push/Pull Tone, & 3-way toggle
-PRS tremolo bridge
-Deluxe PRS case

Learn More

The Archer is sort of a 2 in one pedal. It can be used as just a clean boost by turning the gain all the way down. As you introduce gain it will attenuate the clean signal but there is a magical blend in between that you will find. Please experiment!! Learn More

Equipped with a Celestion G12H and a Vintage 30. Learn More

• Gain, level and continuously-sweepable EQ tone control
• LED-based gain circuit for smooth, high-output distortion
• 1MEG Ohms input impedance for proper pickup loading
• 10K Ohms output impedance when engaged
• 1% metal-film resistors for consistency
• High-voltage poly caps for better tone
• Military-spec circuit board for reliability
• Blue status LED for high visibility and low power consumption
• Easy access battery compartment
• True hardwire bypass
• 5-year warranty

Learn More

This is an aggressive high-gain pedal with a highly-effective built-in switchable gate which dramatically reduces noise and unwanted feedback. Its gain and tonal characteristics are somewhat similar to high-gain tube amplifiers that have been the staple of hard rock and metal sounds since the 80's. On the right, there is a true- bypass switch with an indicator LED to bypass the entire effect. On the left is a gate switch which is only effective when the pedal is on (the gate cannot be used separately.) When the gate's LED (on the left side of the pedal) is ON, the gate will be active whenever the pedal is turned on. The gate is very useful for cleaning up any noise between palm-muted chords and lead phrases, but may be switched off to initiate feedback or to stretch out soloed notes that are fading into noise. 

Learn More