Search results for 'Paul Reed Smith CE'

Introducing the Recto-Verb Twenty-Five 1x12 Combo, the Reverb-endowed, fraternal-twins of Mesa's little Mini Rectifier lunchbox that's been taking names all over the globe. This even mightier package is slightly larger – just big enough to accommodate a 1x12 speaker and long-spring Reverb tank – and boast all the same great performance that the Mini Rec is famous for and more. Plus, their classic vinyl-covered birch cabinets provide a wide array of custom finish options to fully personalize them.

The lush tube-driven Reverb widens the sound and sweetens the attack just a bit, increasing its versatility and appeal for players who favor lower to medium gain in
their style. But don't fret...for those into heavier tones, the trademark Recto sounds are all here and completely authentic.

Learn More

The Boogie 1x12 WideBody delivers the best of the open-back world by rear-mounting the speaker and extending the width of the cab to provide more interior low-end resonance while still emphasizing the signature sparkle and chime of an open-back design. Clean, low and medium-gain styles benefit greatly from the open-back format. Those styles benefit even further with the added bass response and overall fullness provided by the WideBody design. Full bass representation, solid midrange and the elusive high end "openness", sparkle and transparency are what the 1x12 WideBody does best!

Learn More

FEATURES
All-tube Supro circuit
2 Channels with Parallel Link
Tube Tremolo with footswitch jack
24 Watts 6973 power tubes
1×12 Supro DT12 speaker
Blue Rhino Hide tolex
Made in NY, USA

TUBE COMPLEMENT
4x 12AX7EH
2x 6973

Learn More

-Number 35 of 40
-Nightshade finish
-One-piece mahogany set-neck
-Pattern Regular neck carve
-Madagascar rosewood fingerboard
-Dragon tail fingerboard inlay
-24 frets
-Madagascar headstock veneer
-Green Ripple Private Stock eagle headstock inlay
-Phase III Locking tuners
-Madagascar tuner buttons
-Solid african ribbon mahogany body
-Private Stock grade curly maple top w/ retro carve
-85/15 Treble & Bass humbuckers
-Volume, Push/Pull Tone, & 3-way toggle
-PRS tremolo bridge
-Deluxe PRS case

Learn More

The Archer is sort of a 2 in one pedal. It can be used as just a clean boost by turning the gain all the way down. As you introduce gain it will attenuate the clean signal but there is a magical blend in between that you will find. Please experiment!! Learn More

Equipped with a Celestion G12H and a Vintage 30. Learn More

• Gain, level and continuously-sweepable EQ tone control
• LED-based gain circuit for smooth, high-output distortion
• 1MEG Ohms input impedance for proper pickup loading
• 10K Ohms output impedance when engaged
• 1% metal-film resistors for consistency
• High-voltage poly caps for better tone
• Military-spec circuit board for reliability
• Blue status LED for high visibility and low power consumption
• Easy access battery compartment
• True hardwire bypass
• 5-year warranty

Learn More

• 2 Super Hard On circuits in one
• Channel 1 cascades into Channel 2 for incredibly dangerous amounts of gain
• Master Volume control lets you enjoy the madness at lower volumes

Learn More

The Tremolo Probe is a kind of cross between a theremin volume control and a Super Hard-On. There is a 3-5/8" square copper plate mounted on a chunk of 3/8" clear acrylic that passes over the top of the pedal housing, angles down to sharp turn, and goes back to the pedal. Under the whole mess is a 3 5/8" by 7" sheet of aluminum that provides shielding from annoying ground effects and wires under the stage. It also serves to protect the knob from being knocked off if you drop it on that end... and it makes a nice toe chopper if you are barefoot, so (legal disclaimer:) DO NOT DROP THIS PEDAL ON YOUR FOOT! IT IS HEAVY AND HAS VERY POINTY CORNERS THAT COULD DAMAGE LIVING CREATURES AND FINE HARDWOOD FLOORING. ALSO, YOU COULD BREAK SOMETHING. Like your dog. Learn More

This effect is a natural continuation of the probe series... the fuzz factory probe, the volume control/manual tremolo probe, and now a wah. It's probably exactly what you think it is: a theremin-style antenna controlling a wah, getting brighter as your foot approaches. It has one extra feature, however. There's a Super Hard-On boost circuit in front of the wah, with a knob to set the exact level of boost for driving your wah sound. It can be turned up high enough to make the wah crack up a little for that "something's gonna blow" sound. It gets pretty darn loud! Learn More

This is an aggressive high-gain pedal with a highly-effective built-in switchable gate which dramatically reduces noise and unwanted feedback. Its gain and tonal characteristics are somewhat similar to high-gain tube amplifiers that have been the staple of hard rock and metal sounds since the 80's. On the right, there is a true- bypass switch with an indicator LED to bypass the entire effect. On the left is a gate switch which is only effective when the pedal is on (the gate cannot be used separately.) When the gate's LED (on the left side of the pedal) is ON, the gate will be active whenever the pedal is turned on. The gate is very useful for cleaning up any noise between palm-muted chords and lead phrases, but may be switched off to initiate feedback or to stretch out soloed notes that are fading into noise. 

Learn More