Search results for 'paul reed smith tremonti'

  This CE24 features an Eriza Verde Finish, and Pattern Thin neck carve.
  Since the dawn of rock and roll, the snap and response that comes from a bolt-on neck guitar has been an essential part of the mix. These attributes have, in turn, become essential to many players trying to tell their story through music. The CE 24 pairs PRS’s traditional body combination of the mahogany back and maple top with a bolt-on maple neck and rosewood fretboard. The neck sports a Pattern Thin carve and satin nitro finish for a natural, addictive feel. To further maximize the guitar’s inherent tone and clarity, the CE 24 features PRS 85/15 pickups, which Paul designed to have remarkable clarity as well as extended high and low end. The electronics consist of a volume and push/pull tone control with 3-way toggle switch for a total of six classic sounds.

Learn More

  The S2 McCarty 594 Singlecut delivers vintage appointments with the precision of PRS’s modern manufacturing techniques and trusted craftsmanship. Whether you are looking for authentic humbucking tones or nuanced, sweet single-coil sounds, the S2 McCarty 594 Singlecut can seamlessly master both sonic territories thanks to its 58/15 "S" pickups and dual volume and push/pull tone controls.
  The warm, familiar tone of the S2 McCarty 594 Singlecut is further supported by its construction specifications and design. Featuring a bound 22-fret Pattern Vintage neck and slightly thicker back for more sustain the S2 McCarty 594 Singlecut feels and sounds like a guitar you’ve been playing forever. It plays
in tune, stays in tune, and is intonated the entire length of the neck. A zinc two-piece bridge and vintage-style tuners anchor this guitar and stay true to the promise of the McCarty family.
  Designed to capture the heart of the McCarty family of instruments and stay true to the S2 Series spirit, the S2 McCarty 594 Singlecut recreates the essence of vintage.

Learn More

  Paul Reed Smith CE 24 in Faded Grey Black, with Pattern Thin neck profile.
  Since the dawn of rock and roll, the snap and response that comes from a bolt-on neck guitar has been an essential part of the mix. These attributes have, in turn, become essential to many players trying to tell their story through music. The CE 24 pairs PRS’s traditional body combination of the mahogany back and maple top with a bolt-on maple neck and rosewood fretboard. The neck sports a Pattern Thin carve and satin nitro finish for a natural, addictive feel. To further maximize the guitar’s inherent tone and clarity, the CE 24 features PRS 85/15 pickups, which Paul designed to have remarkable clarity as well as extended high and low end. The electronics consist of a volume and push/pull tone control with 3-way toggle switch for a total of six classic sounds.

Learn More

The SE Mark Holcomb model truly stands on its own in the PRS lineup and delivers addictive playability thanks to some unique specifications, including a 24-fret, 25.5” scale length wide thin satin maple neck with 20” radius ebony fretboard. Holcomb’s signature pickups provide the right amount of output and articulation whether you’re playing sophisticated chords or solos and whether you’re playing alone or working in the mix of a band. Other specifications include a quilted maple veneer, black chrome hardware, and a 3-way blade pickup switch with push/pull tone knob for coil splitting. Learn More

The SE Mark Holcomb model truly stands on its own in the PRS lineup and delivers addictive playability thanks to some unique specifications, including a 24-fret, 25.5” scale length wide thin satin maple neck with 20” radius ebony fretboard. Holcomb’s signature pickups provide the right amount of output and articulation whether you’re playing sophisticated chords or solos and whether you’re playing alone or working in the mix of a band. Other specifications include a quilted maple veneer, black chrome hardware, and a 3-way blade pickup switch with push/pull tone knob for coil splitting. Learn More

The SE Custom 24 is the quintessential SE instrument, designed to faithfully reflect the PRS model that started it all. The SE Custom 24 Lefty brings classic PRS playability, reliability, and vibrant tone to the left-handed players of the world. Gig and studio ready, this model keeps all of the same foundational specifications as the SE Custom 24: maple top, mahogany back, wide thin maple neck, 24 frets, 25” scale length, the PRS patented molded tremolo, and dual 85/15 “S” pickups with a 3-way blade pickup switch and push/pull tone control for coil splitting. Learn More

The SE Hollowbody II combines the power and stability of a solid-body electric guitar with the captivating resonance of a hollowbody instrument. The 58/15 LT “S” pickups deliver clarity and balance that sound big and musical in the hollowbody platform. Designed to look as good as it sounds, the SE Hollowbody II also features a figured maple top and back and mahogany sides as well as a mahogany neck (set-neck construction) with PRS trademark bird inlays. Both hollowbody and solid-body players will feel at home with the SE Hollowbody II. Learn More

The JB•2’s classic Alnico V pickups have tone reminiscent of the best examples from the early ‘60s, thanks to the work of Paul Gagon, G&L VP Engineering. Gagon found his inspiration reviewing original prints stored in Leo Fender’s private laboratory at G&L, but that was just the start. About 30 years ago, Gagon was an R&D; engineer at another company when he was tasked with finding out what was so special about the early bolt-on basses many players raved about. Gagon tirelessly analyzed many examples of what were considered holy grail basses, spending time out on the shop floor talking to builders still working in the pickup department since the ‘50s, all on a quest to discover where the real mojo was – and wasn’t. What he learned from the builders matched his own engineering analysis. You see, back in the day, the actual spec of pickups coming down that old production line varied considerably. That meant coming up with the right specs was more challenging than simply following the prints, and Gagon’s persistence paid off as the JB-2 serves up delicious, classic tone. While the pickups are the origin of the tone, the JB•2 will surprise you with a clarity and sustain unmatched by old basses with their rudimentary bridge design. You see, the JB•2 features an innovative G&L Saddle-Lock™ bridge to transfer string energy right into the body end-grain for an incredibly resonant instrument. If you’re ready to let go of the past but still love that classic Alnico tone, get your hands on a JB•2 and experience a brilliant mash-up of old-school and new-school Leo. Once you play a G&L Tribute Series, you’ll never look back. Learn More

The JB•2’s classic Alnico V pickups have tone reminiscent of the best examples from the early ‘60s, thanks to the work of Paul Gagon, G&L VP Engineering. Gagon found his inspiration reviewing original prints stored in Leo Fender’s private laboratory at G&L, but that was just the start. About 30 years ago, Gagon was an R&D; engineer at another company when he was tasked with finding out what was so special about the early bolt-on basses many players raved about. Gagon tirelessly analyzed many examples of what were considered holy grail basses, spending time out on the shop floor talking to builders still working in the pickup department since the ‘50s, all on a quest to discover where the real mojo was – and wasn’t. What he learned from the builders matched his own engineering analysis. You see, back in the day, the actual spec of pickups coming down that old production line varied considerably. That meant coming up with the right specs was more challenging than simply following the prints, and Gagon’s persistence paid off as the JB-2 serves up delicious, classic tone. While the pickups are the origin of the tone, the JB•2 will surprise you with a clarity and sustain unmatched by old basses with their rudimentary bridge design. You see, the JB•2 features an innovative G&L Saddle-Lock™ bridge to transfer string energy right into the body end-grain for an incredibly resonant instrument. If you’re ready to let go of the past but still love that classic Alnico tone, get your hands on a JB•2 and experience a brilliant mash-up of old-school and new-school Leo. Once you play a G&L Tribute Series, you’ll never look back. Learn More

The SE Custom 22 Semi-Hollow has musical midrange and outstanding resonance. The semi-hollow body provides an airy, sweet tone but with a twist of the tone knob, the dual humbuckers can get plenty of bright spank. Additional appointments include a maple top and neck, mahogany back, rosewood fretboard, and dual 85/15 “S” pickups with volume and push/pull tone controls (for coil splitting) paired with a 3-way blade pickup switch. 85/15 “S” pickups lend remarkable clarity and extended high and low end to this semi-hollow’s voice. The SE Custom 22 Semi-Hollow is both versatile and comfortable, making it a reliable tool for professionals, a solid choice for beginners, and a welcome addition to any arsenal. Learn More

The SE Custom 22 Semi-Hollow has musical midrange and outstanding resonance. The semi-hollow body provides an airy, sweet tone but with a twist of the tone knob, the dual humbuckers can get plenty of bright spank. Additional appointments include a maple top and neck, mahogany back, rosewood fretboard, and dual 85/15 “S” pickups with volume and push/pull tone controls (for coil splitting) paired with a 3-way blade pickup switch. 85/15 “S” pickups lend remarkable clarity and extended high and low end to this semi-hollow’s voice. The SE Custom 22 Semi-Hollow is both versatile and comfortable, making it a reliable tool for professionals, a solid choice for beginners, and a welcome addition to any arsenal. Learn More